80MM X 3MM Plow Bolt You will also need a

You will also need a 45lk lock

This is a Hensley style 335 series general purpose bucket tooth

FLARED TOOTH

MOIL POINT A21014 1X41/4 SHANK

This is the retainer for the vertical shroud vs450 and vs500

80MM X 3MM Plow Bolt You will also need aThis steel bucket pin shim is for a pin with an outer diameter of 80 mm. It is 3 mm thick with an OD of 140 mm. Perfect for when you have space between your bucket ears and your machines hook up. Too much of a gap will cause your Bucket to wobble or chatter around on your machine causing wear and tear on your pins and bushings. A bucket pin shim will work just fine if it is a little larger than the Outer Diameter of your pin but not if it is smaller