1310 Driveshaft End Yoke, Dana 60, Dana 70, 29 Spline, 1310, U-Bol, +0.25", (PM7-1-6291) ZJ Ford and GM all take

Ford and GM all take the same front wheel bearings and seals

and has a wider spread than the Dodge version

5/8"-18 x 3-3/8" x 10" round tube u-bolt and spring plate kit

so there's nothing to worry about as long as you have a grinder

Antirock Sway Bars and Currectlync Heavy Duty Steering are a must for serious off-roading

1310 Driveshaft End Yoke, Dana 60, Dana 70, 29 Spline, 1310, U-Bol, +0.25", (PM7-1-6291) ZJ Ford and GM all take1310, 29 spline, U bolt yoke. This is similar to the stock yoke on most Dana 60s. Our design raises the u joint from the mounting surface by 1 4" compared to an OE yoke; this allows for increased drive line angle before binding. It uses U bolts to fasten the u joints instead of straps. We also take the extra step when you buy the kit. If you don't know already, you'll find out that the OE pinion nut for the Dana 60 uses a 1 5 16" socket. What most