Square Lattice Trellis Panel (70mm Gaps) 26mm x 7mm Battens Square Lattice Pull-tight decking screws used for

Pull-tight decking screws used for fixing Cedar Trellis Co's trellises

Please note: Any parts of posts in contact with earth or permanent moisture must be fitted with Post Saver Sleeves or painted in bitumen paint to prevent rot from occurring

You can also add capping rails and gravel boards to complete your trellis design

Cedar Trellis Co's capper is designed to span all post and panel combinations

Gap width: Nominal 5mm- Batten size: 44x18mm (+/-2mm)

Square Lattice Trellis Panel (70mm Gaps) 26mm x 7mm Battens Square Lattice Pull-tight decking screws used forOur square lattice panels come in a range of heights, from 1 ft 6 ft. These are available in a large or small aperture (gap) with sizes of either 40mm or 70mm, as well as a choice of 18mm x 12mm or 26mm x 7mm lathe width. The lattice work is fastened throughout using stainless steel fixings and high quality exterior wood glue, and sits inside a grooved frame (44mm x 32mm) with mitred corners. Hang our square lattice panels between our plain posts and